Emax 2S Tinyhawk S FPV Racing Drone Kit With Camera 0802 15500KV Brushless Motor Support 1/2S Batte
July 10, 2019
Edit
US $99.99
Original Price : US $124.99 (20%)
Limited Offer Emax 2S Tinyhawk S FPV Racing Drone Kit With Camera 0802 15500KV Brushless Motor Support 1/2S Batte with Free Shipping Worldwide!
4.73
Related Products :
Emax Tinyhawk RTF/BNF Kit Rc Plane F4 4in1 3A 15000KV 37CH 25mW 600TVL VTX 1S Indoor FPV Drone FRSKY D8 with Chrismas Gift
EMAX Tinyhawk Freestyle 115mm F411 2S 1103 7000KV Brushless Motor 2.5Inch Fpv Racing Drone BNF
Emax Tinyhawk-II BNF/RTF Kit/LED Strip FPV Racing Drone F4 5A 16000KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 1S-2S
Official Emax 1s 450mAH 80c/160c Lipo Battery Applicable Any 4.35v HV Charger For RC Airplane Tinyhawk Drone FPV RC Model
Product description
[33030497355]Emax On-Board ReceiverNumber of Channels: Up to 8CH using SBUSCompatibility: FrSky D8 modeThe receiver is programmed into the main flight controller MCU via betaflight. The bind procedure is similar and different settings can be changed in betaflight if desired. Binding ProcedureBinding is the process of uniquely associating a receiver to a transmitter module. A transmitter module can be bound to multiple receivers (not to be used simultaneously). A receiver can only be bound to one transmitter module.1.Hold the bind button for 2 seconds while the flight controller is already on. When the RED LED is flashing, it means the receiver is in BIND MODE2.Turn on the transmitter, make sure it is set to D8 mode, and then set it into bind mode. When the BLUE LED on the flight controller starts flashing, it means bind successful.3.Power cycle the flight controller and take your radio out of bind mode.