Home  ›  Controller  ›  Current  ›  Flight  ›  Holybro  ›  Kakute  ›  Sensor  ›  STM32F745

Holybro Kakute F7 AIO STM32F745 Flight Controller w/ OSD PDB Current Sensor Barometer for RC Drone

July 16, 2019 Edit

US $38.12 Original Price : US $40.99 (7%)  

Limited Offer Holybro Kakute F7 AIO STM32F745 Flight Controller w/ OSD PDB Current Sensor Barometer for RC Drone with Free Worldwide Shipping!


 4.46

Buy on AliExpress


Product description

[32984694413]

Holybro Kakute F7 AIO STM32F745 Flight Controller w/ OSD PDB Current Sensor Barometer for RC Drone

Overview:
The Holybro Kakute F7 All-In-One flight controller makes it easy to build your multirotor. It integrates
flight controller (FC), power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F7
AIO’s layout makes it easy to wire up the other components of the multirotor while keeping the build
neat and tidy.
Specification(manual):
Brand name: Holybro
Item name: kakute F7
MCU: STM32F745 32-bit processor
IMU: MPU6000 (SPI)
Barometer: BMP280
Current Sensor: Approximately 130 amps maximum measurable value
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
6 hardware UARTS (UART1,2,3,4,6,7)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
TF card for Blackbox logging
Dimensions: 35x48x7mm (includes foam-mounted gyro board in height)
Mounting Holes: Standard 30.5mm square to center of holes
Weight: 11g

Features:


• Supports Betaflight, Butterflight, and Cleanflight.



• Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level,

all using your transmitter sticks and goggles.



• Soft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need

to soft-mount the board itself.



• High-performance / low-noise / high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz sampling rate.



• Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA pads for use with external GPS/magnetometer units.



• 2 oz. copper PCB allows up to 120A maximum continuous current.



• Dedicated bootloader button for easy firmware flashing.



• Low-profile design fits into even very compact frames.



• Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).



• Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 AIO monitors voltage directly

from the battery power lead.



• Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power

peripherals such as receiver, video transmitter, FPV camera, or LED strip.



• Supports BLHeli pass-through for easy ESC upgrade and configuration.
Package included:
1xkakute F7 V1.5flight controller

Iklan Atas Artikel