GEPRC Cineking 4K 95mm 2-4S Caddx Tarsier Camera 1103 1105 Brushless Motor F4 12A Flight Controller
May 16, 2020
Edit
US $199.99
Original Price : US $199.99 (0%)
Discount Price GEPRC Cineking 4K 95mm 2-4S Caddx Tarsier Camera 1103 1105 Brushless Motor F4 12A Flight Controller with FREE Worldwide Shipping!
4.69
Related Products :
DIY FPV RC drone GEPRC GEP-CP Freestyle small Quadcopter carbon fiber frame
GEPRC GEP-CX Cygnet 145mm 3 Inch Stable F4 20A 48CH RunCam Split Mini 2 1080P HD RC FPV Racing Drone
GEPRC GEP-CQ 3 Inch big space FPV RC Drone Frame
GEPRC GEP-KX5 Elegant PNP/BNF 230mm Wheelbase frame kit combination for RC FPV Racing Drone Quadcopter
Product description
[4000166746300]GEPRC Cineking 4K 95mm 2-4S Caddx Tarsier Camera 1103 1105 Brushless Motor F4 12A Flight Controller DIY FPV Racing Drone
Due to the high value of this product, if AliExpress Standard Shipping is selected, the system will declare customs at the actual sale price. Therefore, depending on the situation of different countries, buyers may have to pay customs duties, or you have the requirement to modify the declared amount, you can contact us!
Introduction:
We are very happy to introduce you to CineKing 4K. CineKing 4K is lightweight and compact. It can perform tasks that cannot be completed by traditional aerial photography aircraft. It can produce high quality up to 4K 30fps, which is very beautiful. CineKing is mainly for indoor shooting, not only for aerial photography, but also for obstacles, competitions, etc. The built-in paddle protection is very safe. It has good airflow, safety, durability and high efficiency, so don't worry that the propeller will hurt people.
We have redesigned the CineKing frame with a wheelbase of 95mm, which is very compact and flexible. The GR1103 3S version weighs about 89g and can be used with great flexibility to complete some difficult aerial operations. CineKing chose the electronic system of STABLE F411, which is lighter and stable.
In terms of power, the GR1103 8000KV (3S battery) and GR1105 5000kv (4S battery) motors are used. The 3S is suitable for indoor shooting, and the 4S has stronger wind resistance and more powerful power.
CineKing is carefully assembled and debugged by the GERPC team. Once the BNF arrives, it can fly as long as the upper frequency. The PNP needs to have its own receiver, and the receiver needs to support the Sbus protocol.
Feature introduction:
- Can record 4K 30fps, 2.7k 60fps, 1080P 90fps video
- Dual camera design, FPV camera 1200TVL, delay within 10ms, reaching the competition level
-You can adjust the 4K parameters using the mobile phone WIFI/APP
-The propeller and paddle protection frame are not visible in the picture, which is very suitable for aerial photography.
- Very stable with STABLE F411 electronic power system
-The flight control is designed with soft mounting to make the gyroscope have a good operating environment.
- Say goodbye to jelly, the picture is stable and has a good flight view
- Newly designed GEP-CK2 rack with reasonable layout
- Redesigned paddle protection frame for better airflow and improved flight efficiency
- Available in 2S and 4S versions to meet different flight needs
- Exquisite installed process to eliminate some potential installation problems
- The PID is carefully debugged by the GERPC team, and the factory can be used to fly.
parameter:
- Model: CineKing 4k
- Rack: GEP-CK2
- Wheelbase: 95mm
-Electronic equipment: STABLE F411 SYSTEM
- Camera: Caddx Tarsier 4K 1200TVL
-propeller: 2inch
- Support receiver: Frsky XM+/ Frsky R-XSR/ Frsky R9mm/TBS Nano SE/DSMX/Futaba/FlySky
CineKing 1103:
- Motor: GR1103 8000KV
-Battery: 2S 650mAh Battery
- Weight: 1103 version 88g (without battery)
CineKing 1105:
- Motor: GR1105 5000KV
-Battery: 3-4S 450-550mAh Battery
- Weight: 1105 version 98g (without battery)
STABLE F411 Micro System:
- Flight Control: STABLE F411 Flight Controller (16*16mm)
-MCU: STM32F411
-IMU: MPU6000 gyro/accelerometer (SPI)
-OSD: BetaFlight OSD w/ AT7456E chip
-BEC Output: 5V@2A
- Size: 21mm*21mm
-Pitch: 16mm*16mm
-With LC filter
-Input voltage: 2-4S LIPO
- Firmware version: MATEKF411
ESC: STABLE F411 BLheli_S 4IN1 12A ESC (16*16mm)
-MCU: BB21F16G
- Continuous output current: 12A
-Input voltage: 2-4S LIPO
- ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
- Size: 23mm*21mm
- Hole spacing 16*16mm
- ESC firmware version: Blheli_S G_H_30
- ESC offset: 210
Image transmission: STABLE F411 VTX 5.8G 200mW (16*16mm)
- Power: PIT/25/100/200mW
- Antenna: interface : IPEX (UFL)
- Telemetry: IRC Tramp
- Size: 17mm*27mm
-Pitch: 16*16mm
You also need the following equipment to fly:
Remote control: you can choose, like the Frasky X9d
Video glasses: such as FatShark V2
Battery: 2S-4S battery is recommended
include:
1 x CineKing 4K Crossing aerial camera
Other show
Shipping:
All items will be shipped within1~3 business days after payment. All items will be shippedwith tracking number.
Contact us:
We always trying to provide the best service and reliable products for every Customer. We do appreciate your positive feedback with 5 star rating comments! Our system will leave feedback to you automatically after we receive your positive feedback.
We know that sometimes when order problems arise,it can be very frustrating,we are there with you every step of the way to make your experience more pleasant. Please feel free to contact us for solution,when you have any questions.
Please don't open case or give us Neutral or Negative feedback directly (including low rating feedback) directly.Our work day is Monay to Satuday,we will assist you in any way possible and aim to answer all emailswithin 24 hours.
Warranty & Return:
1.If you are unsatisfied, you can return the item in original conditions (New, Never Used),then we give you the refund or replacement. Please bear in mind that postage costs are non refundable and any exchanges will incur an additional postage charge which lies with buyer.
2.If the item arrives at your door with apparent damage,please do contact us and take photo on it, we will replace the damage item.
3.If you can determine that a product is defective before using it, we may be able to accept it back for exchange or refund. however, you must contact us firstly.